ControllerCheckup

Xbox controller tester

  • Xbox
  • USB or Bluetooth
  • Chrome, Edge, Firefox, Safari
  • Nothing to install

Test an Xbox Series X|S, Xbox One or Xbox 360 controller in your browser. See every button, both sticks, the triggers and the rumble motors live, and run a 10-second drift check.

No Xbox controller found yet. Connect it, then press any button.

Left stick

X
0.000
Y
0.000
From centre
0.0%

Buttons

Press any button

Right stick

X
0.000
Y
0.000
From centre
0.0%

Drift check

Put the controller down, take your hands off it, then start the check.

Triggers and vibration

LT
0%
RT
0%

Vibration needs Chrome, Edge or Opera, and a controller that reports its motors to the browser.

Every axis

Raw values from -1 to 1. A resting stick should sit close to 0.

Controller details

Name
–
Button names
–
Layout
–
Buttons / axes
–
USB IDs
–
Updates seen
–

Checklist 0 buttons tested

Waiting for your Xbox controller

  1. Connect your Xbox controller with a USB cable, or pair it over Bluetooth in your computer's or phone's settings.
  2. Press any button on it. Browsers only show a controller to a page after a button press.
  3. Nothing happens? Try another USB cable (some only charge), or open this page in Chrome or Edge.

How to test an Xbox controller

  1. Connect the controller to your computer with a USB cable, or pair it over Bluetooth (Xbox One S, Series X|S and Elite Series 2 controllers have Bluetooth; hold the pair button on top until the Xbox button flashes fast).
  2. Open this page and press any button on the controller. Browsers only show a controller to a page after a button press.
  3. Press every button until each tile in the checklist turns green, and roll both sticks round the edge.
  4. Put the controller down and press Start 10-second drift check to measure how far each stick sits from centre when nobody touches it.
  5. Use the vibration buttons to check both rumble motors. In Chrome and Edge on Windows, Xbox One and Series controllers also get a Trigger rumble button for the motors inside the triggers.

What your results mean

ReadingHealthyWorth a look
Stick at rest (drift check)Under 5% from centreOver 5%: raise the game's deadzone; over 10%: calibrate or repair
Trigger travelRuns smoothly from 0% to 100%Stops short of 100%, jumps, or doesn't return to 0%
ButtonsEach tile lights once per pressA tile that won't light, flickers, or lights without a press
Every axisResting axes sit close to 0.00An axis that creeps or jitters while nobody touches it

Common Xbox controller problems

Stick drift

Your character walks or the camera turns on its own. The drift check gives you a number: under 5% is normal, and most games hide it. Between 5% and 10%, raise the deadzone in the game a little above your reading (our deadzone calculator works it out). Over 10% usually means worn or dirty stick sensors.

A button that doesn't register, or registers twice

Press it slowly and quickly a few times. If the tile doesn't light every time, the contact under the button is dirty or worn. If the bumpers (LB and RB) feel mushy, that is a known weak point on many Xbox pads.

Not detected

Some USB cables only charge. Try another cable, another USB port, and press a button after plugging in. If Steam is open it may take over the controller; close it and try again.

Which Xbox controllers work

ControllerUSBBluetoothTrigger rumble
Xbox Wireless Controller (Series X|S)YesYesChrome and Edge on Windows
Xbox One controller (with Bluetooth, 2016 on)YesYesChrome and Edge on Windows
Original Xbox One controller (2013)YesNo (needs the Xbox Wireless Adapter)Chrome and Edge on Windows
Xbox 360 controllerWired version, or wireless with a receiverNoNo
Xbox Elite Series 2YesYesChrome and Edge on Windows. See the Elite tester for paddles.

Questions

How do I test my Xbox controller for drift?

Connect it, press any button so the page can see it, put it down and press Start 10-second drift check. Under 5% from centre is normal. Over 10% means the stick needs calibrating, cleaning or replacing.

Does this Xbox controller tester work on a phone?

Yes. Chrome on Android sees Xbox controllers over Bluetooth or USB. On iPhone and iPad, Safari supports Xbox Wireless Controllers paired over Bluetooth.

Why don't the trigger motors vibrate?

Trigger rumble needs Chrome or Edge on Windows with an Xbox One or Series controller. Other browsers and systems can only reach the two main motors.

My controller isn't detected. What should I do?

Press a button after connecting: browsers wait for one. Then try a different USB cable (many only charge), close Steam, and use Chrome or Edge.

Is my data uploaded?

No. The test runs entirely in your browser and nothing about your controller is sent anywhere.

Can I test an Xbox controller on a PS5 or Xbox console?

Console browsers don't pass controllers to web pages. Use a computer or a phone.