ControllerCheckup

PS3 controller tester

  • PlayStation
  • USB or Bluetooth
  • Chrome, Edge, Firefox, Safari
  • Nothing to install

Test a DualShock 3 or Sixaxis controller: every button, both analog sticks with a drift check, and the L2 and R2 triggers. Getting it connected is the tricky part, so the steps are below.

No DualShock 3 found yet. Connect it, then press any button.

Left stick

X
0.000
Y
0.000
From centre
0.0%

Buttons

Press any button

Right stick

X
0.000
Y
0.000
From centre
0.0%

Drift check

Put the controller down, take your hands off it, then start the check.

Triggers and vibration

LT
0%
RT
0%

Vibration needs Chrome, Edge or Opera, and a controller that reports its motors to the browser.

Every axis

Raw values from -1 to 1. A resting stick should sit close to 0.

Controller details

Name
–
Button names
–
Layout
–
Buttons / axes
–
USB IDs
–
Updates seen
–

Checklist 0 buttons tested

Waiting for your DualShock 3

  1. Connect your DualShock 3 with a USB cable, or pair it over Bluetooth in your computer's or phone's settings.
  2. Press any button on it. Browsers only show a controller to a page after a button press.
  3. Nothing happens? Try another USB cable (some only charge), or open this page in Chrome or Edge.

How to connect a PS3 controller

  • Windows: Windows doesn't include a driver for the DualShock 3. Install a community driver such as DsHidMini, connect with a mini-USB cable, and press the PS button.
  • Linux and Android: usually work straight away over USB.
  • macOS: recent versions often don't recognise it. Test on another computer if nothing appears.

How to test it

  1. Connect with a mini-USB data cable and press the PS button so the player light stops flashing.
  2. Press any button so the page can see the controller.
  3. Press every button and move both sticks until the checklist is done, then run the drift check.

The DualShock 3's buttons are pressure-sensitive, and it has Sixaxis motion sensors. Browsers don't read either, so those can only be tested on a PS3 or with dedicated PC software.

What your results mean

ReadingHealthyWorth a look
Stick at rest (drift check)Under 5% from centreOver 5%: raise the game's deadzone; over 10%: calibrate or repair
Trigger travelRuns smoothly from 0% to 100%Stops short of 100%, jumps, or doesn't return to 0%
ButtonsEach tile lights once per pressA tile that won't light, flickers, or lights without a press
Every axisResting axes sit close to 0.00An axis that creeps or jitters while nobody touches it

Common PS3 controller problems

  • Player lights keep flashing: it isn't paired. Press the PS button; on Windows, check the driver.
  • Drift on old sticks: after 15+ years most DualShock 3 sticks drift. A deadzone above your reading hides it.
  • Fake controllers: many cheap "DualShock 3" copies report a different name or layout. If the buttons show as numbers, it may be a copy.

Questions

Why isn't my PS3 controller detected on Windows?

Windows has no built-in DualShock 3 driver. Install a community driver like DsHidMini, connect by USB and press the PS button.

Can I test the pressure-sensitive buttons?

Not in a browser. Browsers read the buttons as simply pressed or not.

Can I test it over Bluetooth?

Only with a driver that supports DualShock 3 Bluetooth pairing. USB is simpler for testing.

What is the difference between Sixaxis and DualShock 3?

The Sixaxis was the PS3's first controller, without rumble. The DualShock 3 added rumble. Both test the same way here.

Does it work on Android?

Yes, most Android phones see a DualShock 3 over a USB-OTG adapter.