ControllerCheckup

PS5 headset test

Check both ears, the bass and treble, and the microphone of your PlayStation headset, or any gaming headset, in one place. Nothing you record leaves your browser.

Where the sound goes

Connect your headset first: PULSE Elite through its PlayStation Link USB adapter, PULSE 3D through its USB adapter, or wired headphones through your computer or the controller. Then press Show all outputs.

1. Left and right ear

Each sound should play in one ear only, and both ears should sound equally loud.

2. Bass and treble

Bass should feel full without rattling; treble should be clear without hiss.

3. Headset microphone

Level
–

Allow access, pick your headset's microphone and speak normally. The level bar should move with your voice.

4. 3D audio

Check that sounds can come from in front, behind and above, as PS5 3D Audio does: open the 3D Audio Test.

How to test your PS5 headset

  1. Connect the headset to your computer (see below), then press Show all outputs. PlayStation headsets are picked automatically when the page finds them.
  2. Play Left ear and Right ear. Each should play in one ear only, at the same loudness.
  3. Play the bass rumble and treble shimmer to listen for rattles or hiss.
  4. Press Allow microphone access, choose the headset's microphone, and record five seconds. Play it back and listen to your voice.

Connecting PlayStation headsets to a computer

HeadsetHow to connectShows up as
PULSE ElitePlug the PlayStation Link USB adapter into the computer, then press the PS Link button on the headset.PlayStation Link Adapter
PULSE Explore earbudsThe PlayStation Link USB adapter, the same way.PlayStation Link Adapter
PULSE 3DIts USB wireless adapter, or a 3.5 mm cable.PULSE 3D Wireless Headset (or your headphone jack)
Any wired headsetThe headphone jack on your DualSense, connected to the computer with a USB cable.Wireless Controller

On PC and Mac, a headset on PlayStation Link controls its volume with its own buttons.

What your results mean

  • One ear quiet or silent: check the balance setting first. On a wired headset, wiggle the cable near the plug while sound plays; crackling means a damaged cable.
  • Muffled microphone: check the mic isn't muted on the headset, and that nothing covers it. On PULSE Elite, the mic retracts; pull it out fully.
  • Mic level doesn't move: the wrong microphone is chosen, or the headset mic is muted. Pick it from the list.
  • Hiss or crackle in playback: often a weak wireless signal. Move the adapter to a port closer to you, or use a USB extension.

Testing on the PS5 itself

On PS5, go to Settings, Sound, Microphone and use Adjust Microphone Level to hear and set your mic level. For 3D audio, see the 3D audio test. To test the speaker and microphone built into the DualSense, use the controller mic and speaker test.

Questions

Can I test a PULSE Elite on a computer?

Yes. Plug its PlayStation Link USB adapter into the computer and press the PS Link button on the headset. It appears as PlayStation Link Adapter.

Why can't I see my headset in the list?

Press Show all outputs and allow access when asked: browsers hide device names until you do. If it still isn't there, check the headset is on and connected.

My friends say my mic sounds bad. Can this show why?

Yes. Record five seconds and play it back: you hear what they hear. Muffled usually means the mic is covered or far away; crackling usually means a weak connection.

Is my recording saved anywhere?

No. The recording stays in your browser and disappears when you close the page.

Does it work with Xbox, Razer, SteelSeries or other headsets?

Yes. Any headset your computer can use works the same way.