ControllerCheckup

DualSense polling rate test

See how many times a second your PS5 controller reports to your computer, how steady that rate is, and whether USB or Bluetooth is better on your setup.

No controller connected yet.

Polling rate now

– Hz

reports per second, over the last second

Interval
–
Connection
–

Keep a stick moving while the benchmark runs.

Rate over time

Average
–
Lowest second
–
Highest second
–
Jitter
–
Late reports
–
Verdict
–

Your benchmarks

ConnectionAverageLowest secondJitterLate reports
Benchmark on USB, then on Bluetooth, to compare.

Waiting for your controller

  1. Connect your DualSense with a USB-C data cable, or pair it over Bluetooth.
  2. Press Connect controller and choose it in the box that opens.
  3. This test talks to the controller directly, so it needs Chrome, Edge or Opera on a computer.

How to test your polling rate

  1. Connect your DualSense or DualSense Edge with a USB-C data cable, or pair it over Bluetooth.
  2. Open this page in Chrome, Edge or Opera on a computer and press Connect controller.
  3. Keep a stick moving and watch the live rate and chart.
  4. Press Run 10-second benchmark. Then switch connection and run it again to compare.

What the numbers mean

ReadingWhat it isGood result
Polling rate (Hz)How many reports the controller sends each second.Close to the same figure every second.
IntervalThe time between two reports: 1000 divided by the rate.Steady, not jumping around.
Lowest secondThe worst whole second in the benchmark.Not far below the average.
JitterHow much the gap between reports varies.Under about ±1.5 ms.
Late reportsGaps more than two and a half times longer than usual: a report that arrived late or went missing.Close to zero.

USB or Bluetooth?

A USB cable usually gives the steadiest rate, because nothing else shares the connection. Bluetooth shares the air with Wi-Fi, headsets and other devices, so its rate can dip and its jitter rise, especially if the computer's Bluetooth adapter is behind the case or far away. If your Bluetooth result is unstable, move closer, use a USB Bluetooth adapter on a front port or extension, or switch to a cable.

Polling rate is not the whole story

A higher polling rate means your controller's latest state reaches the computer sooner, but it is only one part of input lag. The game, the computer or console and the screen add their own delay, which no website can measure. A steady rate matters as much as a high one: an even 250 Hz feels better than a rate that jumps between 125 and 1000.

Some PC tools change the DualSense's USB polling rate. That's outside what this page does: it only reads the rate, and changes nothing on your controller. To see the delay each report adds, try the input lag test.

Questions

What is a normal DualSense polling rate?

Run the benchmark to see your own figure. What matters most is that the rate stays steady, with low jitter and almost no late reports.

Why is my Bluetooth rate lower or uneven?

Bluetooth shares the airwaves with Wi-Fi and other devices. Distance, walls and a weak adapter all make reports arrive late. A USB cable avoids this.

Does a higher polling rate reduce input lag?

It reduces the controller's share of the delay. The game, PC or console and screen add their own delay on top.

Does this test change my controller?

No. It only measures how often reports arrive. Nothing is sent to the controller.

Why do I have to move a stick?

Over some connections the controller sends fewer reports when nothing changes. Moving a stick keeps reports flowing so the measurement is fair.

Can I test polling rate on a phone?

No. The full test needs Chrome, Edge or Opera on a computer, which can read the controller's reports directly.