ControllerCheckup

Stick circularity test

Roll each stick around its edge and see how close its range is to a perfect circle. Find sticks that can't reach full tilt in some directions, before they cost you in game.

No controller connected yet.

Left stick

Average error
–
Covered
0%
Shortest reach
–

Push the stick to the edge and roll it slowly round, three times.

Right stick

Average error
–
Covered
0%
Shortest reach
–

Push the stick to the edge and roll it slowly round, three times.

Roll each stick slowly around its outer edge, pressing firmly against the rim. The blue outline shows where your stick reached; the faint circle is a perfect circle. Spin both ways.

Waiting for your controller

  1. Connect your DualSense with a USB-C data cable, or pair it over Bluetooth.
  2. Press Connect controller and choose it in the box that opens.
  3. No box? Press any button on the controller to start the basic test.

How to run the circularity test

  1. Connect your DualSense or DualSense Edge and press Connect controller (or press any button in other browsers).
  2. Push the left stick firmly against its outer rim and roll it slowly round, three times. Then go the other way.
  3. Do the same with the right stick.
  4. Once every direction is covered, read the average error and the shortest reach.

What the numbers mean

Average errorMeaning
Under 8%Very round. Full tilt in every direction.
8–15%Fairly round. Normal for most controllers; games' outer deadzones hide it.
Over 15%Not round. The stick falls short or overshoots in some directions.

Shortest reach is the direction where the stick got least far from centre. Below about 90% means full speed, full sprint or full aim speed may not be reachable that way.

Why circularity matters

Games read the stick's distance from centre to decide how fast you move or turn. If a stick only reaches 85% to the upper left, you can never move at full speed in that direction. Uneven range also makes aim speed change as you move the stick round.

  • Falls short in one direction: dirt around the stick, a worn stick module, or a stick that needs calibrating.
  • Overshoots or looks square: common with replacement Hall effect or TMR sticks that haven't been calibrated after fitting.
  • Different every time: the stick module is wearing out.

Circularity is about the outer edge. For the centre, run the stick drift test, and for game settings, the deadzone calculator.

Questions

What is a good stick circularity score?

An average error under 8% is very good. Up to 15% is normal and rarely noticed in games. Above 15%, the stick may not reach full tilt in some directions.

Does stick circularity cause drift?

No. Circularity is about the outer edge; drift is about the centre. A stick can have one problem without the other, so test both.

Why is my Hall effect stick not round?

Replacement Hall effect and TMR sticks often need calibrating after they are fitted. Until then, their range can look square or uneven.

Does it work with the DualSense Edge?

Yes. Test each stick module; swapping modules and testing again shows whether a problem moves with the module.

Why do I need to roll the stick three times?

The test keeps the furthest point in each direction. A few slow, firm turns make sure every direction is captured.