ControllerCheckup

PS5 controller stick drift test

Put your DualSense down, let go of the sticks, and see exactly how far each one drifts from centre. Then check each stick still reaches the edge in every direction.

No controller connected yet.

Left stick

X
0.000
Y
0.000
From centre
0.0%

Drift check

Put the controller on a table and take your hands off it, then start the check.

Right stick

X
0.000
Y
0.000
From centre
0.0%

Range check

Push each stick all the way to the edge and roll it round in slow circles. Every direction it reaches lights up.

Left: 0 of 8 directions
Right: 0 of 8 directions

Waiting for your controller

  1. Connect your DualSense with a USB-C data cable, or pair it over Bluetooth.
  2. Press Connect controller and choose it in the box that opens.
  3. No box? Press any button on the controller to start the basic test.

How to check for stick drift

  1. Connect your DualSense by USB-C cable or Bluetooth and press Connect controller. In browsers other than Chrome, Edge and Opera, press any button on the controller instead.
  2. Put the controller on a flat surface and take your hands off it completely.
  3. Press Start 10-second drift check and wait. The page measures both sticks while nothing touches them.
  4. Then push each stick to the edge and roll it round slowly to run the range check.

What your results mean

Average offsetWhat it meansWhat to do
Under 3%No driftNothing.
3–5%Slightly off centreNormal for most controllers. Games' default deadzones hide it.
5–10%DriftingRaise the deadzone in your game a little above the reading. Use the deadzone calculator.
Over 10%Heavy driftA deadzone this big makes aiming feel slow. Calibration, cleaning or a stick replacement is the real fix.

Jitter shows whether the reading stays steady or wanders. A stick that wanders while nobody touches it often has dirt or wear inside, even if its average offset looks small.

Range check: a healthy stick lights all 8 directions. A direction that won't light even when you push hard means the stick can't reach full movement that way, which shows up in games as a character that won't run at full speed in one direction.

Why sticks drift

The DualSense's sticks measure their position with sensors that wear as the stick moves. Dust and grime under the stick, and the springs that pull it back to centre, wear too. Over time the stick stops sitting exactly in the middle, and the game reads that as a small push.

Questions

How much stick drift is normal?

Up to about 3–5% off centre at rest is normal for a DualSense. Games use a small deadzone to ignore it.

Can I fix stick drift without opening the controller?

Sometimes. Cleaning around the base of the stick with compressed air and calibrating can help. If the reading stays above 10%, the stick is usually worn.

Does stick drift get worse?

Usually, yes. Run the check every so often and compare the numbers.

Is stick drift covered by warranty?

Drift that appears during the warranty period is usually treated as a fault. Contact PlayStation support for your country with your test results.