How to test your triggers
- Connect your DualSense, DualSense Edge or another PS5 controller and press Connect controller, or press any button in other browsers.
- Squeeze L2 slowly all the way in, then let it go. Do it three times. Then do the same with R2.
- Read the verdict for each trigger.
What each reading means
| Reading | Healthy | Problem sign |
|---|---|---|
| Highest reached | 100% when fully pressed | Stops short: something blocks the trigger, or the sensor is worn. |
| At rest | 0% when released | Above about 3%: the trigger sticks or doesn't spring back fully, so games may see a light press. |
| Click point | Where the trigger starts counting as pressed | Very different between L2 and R2. |
| Levels seen | Hundreds of the 256 possible steps on a slow press | Very few levels on slow presses: the reading jumps. |
| Jumps | 0 | Sudden leaps while pressing slowly usually mean a dirty or worn sensor. |
Common trigger problems and fixes
- Doesn't return to zero: dirt or a sticky spill under the trigger, or a tired return spring. Work the trigger many times; compressed air around the gap can help.
- Won't reach 100%: an adaptive trigger effect may still be active from a game. Reconnect the controller, then test again. On a DualSense Edge, check the trigger stop slider.
- Jumpy reading: the trigger's position sensor is worn. It may need repair or replacement.
To feel the resistance and vibration effects games use, try the adaptive trigger test. For the sticks, use the stick drift test.
Questions
Why does my trigger not go to 100%?
Press it fully. If it still stops short, a leftover adaptive trigger effect, a DualSense Edge trigger stop, dirt or a worn sensor can be the cause. Reconnecting the controller clears leftover effects.
Why does my trigger read above 0% when I'm not touching it?
The trigger isn't springing all the way back, often from dirt or a sticky spill. Games may then think it is lightly pressed.
What does "levels seen" mean?
Each trigger reports 256 steps from released to fully pressed. A slow press should pass through most of them. Very few levels means the reading jumps.
Can I test DualSense Edge triggers?
Yes. With a trigger stop on, the trigger only clicks and the test tells you so; turn the stop off to check the full range.
Does it work over Bluetooth?
Yes, in Chrome, Edge or Opera on a computer. Other browsers run the basic test, which also reads the triggers.