How to test your adaptive triggers
- Open this page in Chrome, Edge or Opera on a computer, connect your DualSense, and press Connect controller.
- Press Compare both triggers. Both triggers get full resistance from the very start.
- Squeeze L2 and R2 slowly at the same time. They should feel equally stiff all the way down.
- Try the other effects: Weapon should give a clear click partway down, Bow builds tension then snaps back, Vibration buzzes under your finger.
- Press Reset both when you're done. Effects also stop when the controller reconnects to your PS5.
What your results mean
| What you feel | Likely cause |
|---|---|
| Both triggers feel the same | Healthy. |
| One trigger has little or no resistance | A broken gear or a failed trigger motor on that side. |
| Grinding or clicking where there shouldn't be any | A damaged gear. |
| Resistance works but the pressure bar never reaches 100% | A worn trigger sensor, separate from the adaptive part. |
Triggers feel loose in every game
Before assuming a fault, check the PS5's trigger effect intensity under Settings, Accessories, Controllers. If it's off, no game can use the adaptive triggers. If the triggers work here, the controller is fine.
Questions
Why does this need Chrome, Edge or Opera?
Sending trigger effects means talking to the controller directly, which only these browsers can do on a computer.
Will this change my controller's settings?
No. Effects only last while the controller is connected to this page. Press Reset both, or reconnect the controller to your PS5, and the triggers are back to normal.
Can it fix a broken trigger?
No. It helps you find which trigger is faulty. A trigger with no resistance usually needs a gear or motor replaced.
Does it work with the DualSense Edge?
Yes. Connect the Edge the same way. With a trigger stop on, the trigger has less travel, so switch the stops off to feel each effect fully.