How to test your Access controller
- Connect the Access controller to your computer with a USB-C data cable, or pair it over Bluetooth.
- Open this page in Chrome, Edge or Opera on a computer and press Connect controller. Pick the controller in the box that opens.
- Press each button cap and the centre button. Each one lights up in the drawing.
- Move the stick to the edge in every direction, then let go: it should return to the centre.
- Plug accessory switches or sticks into the expansion ports and press them. Their rows should react.
What this test shows
| Part | What you see |
|---|---|
| Button caps B1 to B8 and centre | The physical buttons, before your profile maps them to game buttons, so you know each switch works. |
| Mapped output | What your current profile sends to games for the buttons you're pressing, such as Cross or R2. |
| Stick | Live position, and how far it rests from centre (drift). |
| Expansion ports E1 to E4 | Whether a button, trigger or stick accessory is plugged in, and its live reading. |
| Profile, battery and firmware | The active profile (1 to 3), charge level and firmware version. |
| Lights | Turn the profile lights, player indicator, status light and light bar on and off to check every LED. |
Common problems
- A button doesn't light up: try a different button cap on the same spot. If the spot still doesn't respond, the switch under it may be faulty.
- A button sends the wrong game button: that's your profile, not a fault. Change the mapping in the PS5's Accessibility settings, under Controllers, Access controller.
- An expansion port shows nothing: push the 3.5 mm plug in fully, and try the accessory in another port.
- The stick drifts: check the stick cap is seated properly and nothing presses against it.
Testing a DualSense alongside your Access controller? Use the PS5 controller tester.
Questions
Can I test an Access controller without a PS5?
Yes. Connect it to a computer by USB-C cable or Bluetooth and open this page in Chrome, Edge or Opera.
Why do the button numbers differ from my profile?
B1 to B8 are the physical button spots. Your profile decides which game button each one sends, shown under Mapped output.
Will this change my profiles?
No. The test only reads the controller. The light buttons change the lights while connected; profiles and mappings stay as they are.
Which accessories work in the expansion ports?
Accessibility switches, buttons, triggers and sticks with 3.5 mm plugs. The page shows the type the controller detects for each port.
Does it work over Bluetooth?
Yes. Over Bluetooth the controller may take a moment to send all its details.