ControllerCheckup

DualSense Edge tester

Check the parts only the DualSense Edge has: the back buttons, the Fn buttons, the swappable stick modules and the trigger stops.

No controller connected yet.

Left stick module

X
0.000
Y
0.000
At rest
–

Edge buttons

Left back buttonNot pressed yet
Right back buttonNot pressed yet
Left FnNot pressed yet
Right FnNot pressed yet

Connect your DualSense Edge to check its back buttons, Fn buttons, stick modules and trigger stops.

Triggers and trigger stops

L2
0%

Left trigger stop: –

R2
0%

Right trigger stop: –

Right stick module

X
0.000
Y
0.000
At rest
–

Pressed now

Press any button

Back buttons send whatever you've assigned to them in the controller's profile. If a back button is assigned to another button, you'll see that button here too. Test with the default profile for the clearest result.

Waiting for your controller

  1. Connect your DualSense with a USB-C data cable, or pair it over Bluetooth.
  2. Press Connect controller and choose it in the box that opens.
  3. This test talks to the controller directly, so it needs Chrome, Edge or Opera on a computer.

How to test your DualSense Edge

  1. Open this page in Chrome, Edge or Opera on a computer. Connect the Edge with its USB-C cable or over Bluetooth, and press Connect controller.
  2. Press both back buttons and both Fn buttons. Each tile turns green once it works.
  3. Put the controller down and let go of the sticks to see each stick module's resting drift.
  4. Squeeze each trigger, then switch its trigger stop on and squeeze again.

What your results mean

PartHealthyWorth a closer look
Back buttonsEach one turns green and shows in "Pressed now"A back button that never registers: check it's seated properly, or try the other back button shape.
Fn buttonsBoth turn greenOne never registers: the button is worn or blocked.
Stick modulesUnder 3–5% at restOver 10%: swap in a replacement stick module; that's what they're designed for.
Trigger stopsWith a stop on, the trigger clicks like a button and reads 100%The trigger still has full travel with the stop on: the stop slider isn't engaging.

Back buttons and profiles

The Edge's back buttons copy whatever button you've assigned to them in the active profile. If you see another button light up when you press a back button, that's the assignment working. For the clearest test, use the default profile.

For the drift, triggers, touchpad, motion and battery, the main PS5 controller tester and the other tests work with the Edge too.

Questions

Does the Edge work in the basic test?

The basic test sees the standard buttons, sticks and triggers. The back buttons, Fn buttons and trigger stops need the full test in Chrome, Edge or Opera on a computer.

How do I replace a drifting stick module?

Lift the faceplate release on the back, remove the faceplate, lift the module lever and pull the module out. Replacement modules are sold by Sony.

Why does a back button show as another button?

Back buttons are assigned to other buttons in your profile. The tester shows both the back button and the button it's assigned to.

Can I test a standard DualSense here?

Yes, but it has no back or Fn buttons. Use the main tester for a standard DualSense.