ControllerCheckup

Joy-Con drift test

  • Nintendo
  • USB or Bluetooth
  • Chrome, Edge, Firefox, Safari
  • Nothing to install

Find out whether your Joy-Con are drifting, and by how much. Pair a Joy-Con with your computer or phone, let go of the stick, and get a reading in 10 seconds.

No Joy-Con found yet. Connect it, then press any button.

Left stick

X
0.000
Y
0.000
From centre
0.0%

Buttons

Press any button

Right stick

X
0.000
Y
0.000
From centre
0.0%

Drift check

Put the controller down, take your hands off it, then start the check.

Triggers and vibration

LT
0%
RT
0%

Vibration needs Chrome, Edge or Opera, and a controller that reports its motors to the browser.

Every axis

Raw values from -1 to 1. A resting stick should sit close to 0.

Controller details

Name
–
Button names
–
Layout
–
Buttons / axes
–
USB IDs
–
Updates seen
–

Checklist 0 buttons tested

Waiting for your Joy-Con

  1. Connect your Joy-Con with a USB cable, or pair it over Bluetooth in your computer's or phone's settings.
  2. Press any button on it. Browsers only show a controller to a page after a button press.
  3. Nothing happens? Try another USB cable (some only charge), or open this page in Chrome or Edge.

How to test a Joy-Con for drift

  1. Take the Joy-Con off the Switch. Hold the small sync button on its rail until the lights run back and forth, then pick it in your computer's or phone's Bluetooth settings.
  2. Press a button on it so the page can see it. Each Joy-Con usually appears as its own controller; test them one at a time, or pick one in the list.
  3. Lay it flat, take your hands off and press Start 10-second drift check.
  4. Push the stick to the edge in every direction and watch the trail: a healthy stick draws a round circle.

A Joy-Con held on its own is sideways, so its stick may read as turned by 90°. That doesn't affect the drift reading, which only measures distance from centre.

What your results mean

ReadingHealthyWorth a look
Stick at rest (drift check)Under 5% from centreOver 5%: raise the game's deadzone; over 10%: calibrate or repair
Trigger travelRuns smoothly from 0% to 100%Stops short of 100%, jumps, or doesn't return to 0%
ButtonsEach tile lights once per pressA tile that won't light, flickers, or lights without a press
Every axisResting axes sit close to 0.00An axis that creeps or jitters while nobody touches it

What to do about Joy-Con drift

  1. Calibrate first. On the Switch, go to System Settings, Controllers and Sensors, Calibrate Control Sticks. Then test again here.
  2. Update the controller. In the same menu, choose Update Controllers.
  3. Check repair options. Nintendo has repaired drifting Joy-Con free of charge in many regions. Check Nintendo's support site for your country before paying for a repair.
  4. Replace the stick. Replacement sticks are cheap but the job needs small tools and care; Hall-effect replacement sticks avoid the wear that causes drift.

Why Joy-Con drift so often

Joy-Con sticks are small, and the contacts inside wear as the stick moves. Dust gets in through the gap round the stick. Over time the stick stops reading exactly zero at rest, and games see a small push in one direction.

Questions

How do I check if my Joy-Con is drifting?

Pair it with your computer or phone, press a button, lay it flat and run the 10-second drift check. Over 5% from centre is drift worth fixing.

Can I test both Joy-Con at once?

Each Joy-Con appears as a separate controller. Test them one after the other, or switch between them with the list at the top.

Will calibrating fix Joy-Con drift?

It can fix small drift. If the reading stays over 10% after calibrating on the Switch, the stick needs repair or replacement.

Does Nintendo repair Joy-Con drift for free?

In many regions, yes. The terms vary by country, so check Nintendo's support site for yours.

Does this work with Switch 2 Joy-Con?

They pair the same way. If a browser doesn't recognise the layout yet, buttons show by number, but the drift check works the same.