ControllerCheckup

Joystick tester

  • PC & other
  • USB or Bluetooth
  • Chrome, Edge, Firefox, Safari
  • Nothing to install

Test a flight stick, HOTAS or arcade joystick: the main X and Y axes, twist and throttle, the hat switch and every button, with live readings for each axis.

No joystick found yet. Connect it, then press any button.

Stick (X and Y)

X
0.000
Y
0.000
From centre
0.0%

Buttons

Press any button

Hat switch

Push the hat (the small thumb switch on top) in each direction.

Drift check

Put the controller down, take your hands off it, then start the check.

Every axis

Raw values from -1 to 1. A resting stick should sit close to 0.

Controller details

Name
–
Button names
–
Layout
–
Buttons / axes
–
USB IDs
–
Updates seen
–

Checklist 0 buttons tested

Waiting for your joystick

  1. Connect your joystick with a USB cable, or pair it over Bluetooth in your computer's or phone's settings.
  2. Press any button on it. Browsers only show a controller to a page after a button press.
  3. Nothing happens? Try another USB cable (some only charge), or open this page in Chrome or Edge.

How to test a joystick

  1. Plug the joystick in by USB and press any button on it.
  2. Move the stick to all four corners and round the edge. The trail should fill a full square or circle.
  3. Check Every axis: twist the stick, move the throttle lever and any sliders. Each one should move its bar smoothly across the full range, with no jumps.
  4. Push the hat switch in every direction.
  5. Let go and run the drift check: a joystick that springs back should read close to centre.

Finding problems

What you seeWhat it means
An axis bar jumps or flickers while you move slowlyA dirty or worn sensor (common on older potentiometer sticks)
An axis never reaches -1.00 or 1.00It needs calibrating in the joystick's software or Windows "Set up USB game controllers"
The stick reads off-centre at restDrift or a weak centring spring; add a small deadzone in your simulator
Hat directions missingSome hats only report 4 directions; others are worn

Why buttons show as numbers

Most flight sticks use a non-standard layout, so the browser lists buttons and axes by number. That's normal. Note which number is which, and match them in your simulator's control settings.

Questions

Which joysticks work?

Any USB joystick your computer recognises: Thrustmaster, Logitech, VKB, Virpil, CH Products, arcade sticks and more.

Where is the throttle and twist?

Look under Every axis. Twist (rudder) and throttle are usually axis 2, 3, 5 or 6, depending on the joystick.

How do I test the hat switch?

Push it in each direction. Many joysticks report it as a single axis that changes value per direction, which the hat panel decodes.

Can I test force feedback?

Browsers can't send force feedback to joysticks, so it can't be tested here.

Why does my axis jitter?

Older sticks use potentiometers that wear and collect dust. Contact cleaner or a replacement sensor usually fixes it.