ControllerCheckup

PS4 controller tester

  • PlayStation
  • USB or Bluetooth
  • Chrome, Edge, Firefox, Safari
  • Nothing to install

Test a DualShock 4 in your browser: every button, both sticks with a drift check, the L2 and R2 triggers, the touchpad click and both rumble motors.

No DualShock 4 found yet. Connect it, then press any button.

Left stick

X
0.000
Y
0.000
From centre
0.0%

Buttons

Press any button

Right stick

X
0.000
Y
0.000
From centre
0.0%

Drift check

Put the controller down, take your hands off it, then start the check.

Triggers and vibration

LT
0%
RT
0%

Vibration needs Chrome, Edge or Opera, and a controller that reports its motors to the browser.

Every axis

Raw values from -1 to 1. A resting stick should sit close to 0.

Controller details

Name
–
Button names
–
Layout
–
Buttons / axes
–
USB IDs
–
Updates seen
–

Checklist 0 buttons tested

Waiting for your DualShock 4

  1. Connect your DualShock 4 with a USB cable, or pair it over Bluetooth in your computer's or phone's settings.
  2. Press any button on it. Browsers only show a controller to a page after a button press.
  3. Nothing happens? Try another USB cable (some only charge), or open this page in Chrome or Edge.

How to test a PS4 controller

  1. Connect the DualShock 4 with a micro-USB data cable, or pair it over Bluetooth: hold Share and the PS button until the light bar flashes, then pick "Wireless Controller" in your computer's Bluetooth settings.
  2. Press any button so the page can see it.
  3. Press every button, including the touchpad click and the PS button, until the checklist is complete.
  4. Run the 10-second drift check with the controller on a table and your hands off it.
  5. Try both vibration motors.

Browsers can't read the DualShock 4's touch positions, motion sensors or battery level through the standard controller connection. For a full sensor test of a PS5 controller, use the PS5 controller tester.

What your results mean

ReadingHealthyWorth a look
Stick at rest (drift check)Under 5% from centreOver 5%: raise the game's deadzone; over 10%: calibrate or repair
Trigger travelRuns smoothly from 0% to 100%Stops short of 100%, jumps, or doesn't return to 0%
ButtonsEach tile lights once per pressA tile that won't light, flickers, or lights without a press
Every axisResting axes sit close to 0.00An axis that creeps or jitters while nobody touches it

Common DualShock 4 problems

Stick drift

The DualShock 4 uses the same kind of stick sensors as most controllers, and they wear. Read your drift number, then set a deadzone just above it in your games.

L2 or R2 doesn't reach 100%

The trigger spring or the sensor behind it can wear. If the bar stops at 80–90%, games that need a full pull (like full throttle) won't get it.

Light bar flashes, then the controller disconnects

Often a worn micro-USB port or a tired battery. Test with a known-good cable, and use the connection stability test over Bluetooth to catch dropouts.

Questions

How do I connect a PS4 controller to my PC?

Use a micro-USB data cable, or hold Share and the PS button until the light bar flashes, then pair "Wireless Controller" in your Bluetooth settings.

Can I test the PS4 touchpad here?

The touchpad click works as a button. Browsers can't read where your finger is on a DualShock 4 touchpad.

Why do my buttons show as numbers?

Some browsers don't recognise the DualShock 4's layout and report buttons by number. Chrome and Edge show the proper names.

Does DS4Windows affect the test?

DS4Windows can make the controller appear twice, once as itself and once as an Xbox pad. Close it, or pick one controller in the list on this page.

Is this the same as the PS5 controller tester?

No. The PS5 tester talks to a DualSense directly and reads its touchpad, motion, battery and more. This page uses the standard controller connection that works with a DualShock 4.