ControllerCheckup

8BitDo controller test

  • PC & other
  • USB or Bluetooth
  • Chrome, Edge, Firefox, Safari
  • Nothing to install

Test an 8BitDo controller in any of its modes. See which mode your computer thinks it is in, check every button and stick, and fix a controller Windows won't recognise.

No 8BitDo controller found yet. Connect it, then press any button.

Left stick

X
0.000
Y
0.000
From centre
0.0%

Buttons

Press any button

Right stick

X
0.000
Y
0.000
From centre
0.0%

Drift check

Put the controller down, take your hands off it, then start the check.

Triggers and vibration

LT
0%
RT
0%

Vibration needs Chrome, Edge or Opera, and a controller that reports its motors to the browser.

Every axis

Raw values from -1 to 1. A resting stick should sit close to 0.

Controller details

Name
–
Button names
–
Layout
–
Buttons / axes
–
USB IDs
–
Updates seen
–

Checklist 0 buttons tested

Waiting for your 8BitDo controller

  1. Connect your 8BitDo controller with a USB cable, or pair it over Bluetooth in your computer's or phone's settings.
  2. Press any button on it. Browsers only show a controller to a page after a button press.
  3. Nothing happens? Try another USB cable (some only charge), or open this page in Chrome or Edge.

How to test an 8BitDo controller

  1. Choose a mode and connect by USB, Bluetooth or the 2.4 GHz receiver.
  2. Press any button. Under Controller details you'll see the name your computer received and which button names it uses.
  3. Press every button until the checklist is green, roll both sticks, squeeze the triggers and run the drift check.

Which mode is it in?

What the page showsModeGood for
Xbox button names, "Xbox" or "XInput" in the nameX-inputWindows PC games and Steam
Generic names or numbers, "8BitDo" in the nameD-inputEmulators and older PC games
Nintendo names, "Pro Controller" in the nameSwitch modeNintendo Switch

How you change mode depends on the model: many hold a button (such as Start plus X, B or Y) while turning on, and others have a switch on the back. Check your model's manual.

What your results mean

ReadingHealthyWorth a look
Stick at rest (drift check)Under 5% from centreOver 5%: raise the game's deadzone; over 10%: calibrate or repair
Trigger travelRuns smoothly from 0% to 100%Stops short of 100%, jumps, or doesn't return to 0%
ButtonsEach tile lights once per pressA tile that won't light, flickers, or lights without a press
Every axisResting axes sit close to 0.00An axis that creeps or jitters while nobody touches it

Not detected on Windows?

  • Switch to X-input mode; Windows supports it without extra drivers.
  • Update the firmware with 8BitDo's Ultimate Software or Firmware Updater.
  • Try another cable: many short cables only charge.

Questions

Which 8BitDo controllers can I test?

Any model your computer can see: Ultimate, Pro 2, SN30 Pro, Lite, Micro, arcade sticks and more.

Why are my buttons numbered?

In D-input mode, browsers often don't recognise the layout and list buttons by number. Switch to X-input for named buttons.

How do I check the back paddles on the Pro 2?

Map them to normal buttons in 8BitDo Ultimate Software, then press them here.

Does it test the 2.4 GHz receiver?

Yes. The receiver makes the controller appear as a normal one, and the connection stability test catches dropouts.

Can I update firmware here?

No. Use 8BitDo's own software; then test again here.