ControllerCheckup

Fight stick test

  • PC & other
  • USB or Bluetooth
  • Chrome, Edge, Firefox, Safari
  • Nothing to install

Test an arcade stick or hitbox: all 8 lever directions, every button, and how many buttons register when you press them together, which matters for combos and macros.

No fight stick found yet. Connect it, then press any button.

Lever

Directions reached: 0 of 8

Roll the lever round the gate. All 8 directions should light, and the centre should light when you let go.

Buttons pressed together

0

Most buttons held at once: 0

Press every attack button at the same time, the way you would for a combo. All of them should register. If some drop out, the stick's board can't read that many presses together.

Buttons

Press any button

Every axis

Raw values from -1 to 1. A resting stick should sit close to 0.

Controller details

Name
–
Button names
–
Layout
–
Buttons / axes
–
USB IDs
–
Updates seen
–

Checklist 0 buttons tested

Waiting for your fight stick

  1. Connect your fight stick with a USB cable, or pair it over Bluetooth in your computer's or phone's settings.
  2. Press any button on it. Browsers only show a controller to a page after a button press.
  3. Nothing happens? Try another USB cable (some only charge), or open this page in Chrome or Edge.

How to test a fight stick

  1. Connect the stick by USB and press any button.
  2. Set the stick's lever mode switch to DP (D-pad) if it has one. In LS or RS mode the lever moves a stick instead; the lever panel reads both.
  3. Roll the lever round the gate. All 8 directions should light, and the centre should light when you let go.
  4. Press each button, then press all your attack buttons at once. The "pressed together" count should match the number of buttons you're holding.

What to look for

ProblemLikely cause
A direction won't lightA microswitch in the lever has failed
Diagonals are hard to hitA square gate or tight restrictor; many players prefer an octagonal gate
A button sometimes doesn't registerA worn button switch or loose wire on the quick disconnect
Fewer buttons register together than you pressThe stick's board limits simultaneous presses

Lever and button switches are standard parts (Sanwa, Seimitsu and others) and are easy to replace on most sticks.

Hitbox and all-button controllers

All-button controllers send directions as buttons. When left and right are pressed together, the controller decides the result (often neutral). That's called SOCD handling. Press left and right together here and watch which direction lights to see what your controller does.

Questions

Which fight sticks work?

Any USB arcade stick or hitbox your computer recognises: Hori, Victrix, Qanba, Razer, Mad Catz, Snack Box and custom builds.

Why does my lever move a stick instead of the D-pad?

Your stick is in LS or RS mode. Switch it to DP, or test it as it is: the lever panel reads both.

How many buttons should register at once?

Good boards register every button at once. If some drop out when you press them all, the board limits simultaneous presses.

Can I test a stick made for PS5 or Xbox?

Yes. Most modern sticks work on PC too, and appear as standard controllers.

How do I test SOCD on a hitbox?

Press left and right together and watch the lever panel: it shows whether your controller outputs neutral, left or right.